SBTET TS -Diploma Exams Notification Nov 2019 || Updated ||

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In Para (4) line ((7) read as afer 14-10-2010 instead of on or before 13-10-2019

In Para (5), line (2) read as 14-10-2019 instead of 13-09-2019.

 

 

ELECTRICAL SUPERVISOR AND WIRE-MAN EXAMINATION-2019 NOTIFICATION

STATE BOARD OF TECHNICAL EDUCATION AND TRAINING
ANDHRA PRADESH:: VIJAYAWADA

 

NOTIFICATION FOR CONDUCTING COMPETENCY CERTIFICATE EXAMINATION FOR ELECTRICAL SUPERVISOR AND WIREMAN UNDER A.P.E.L. REGULATIONS ACT 1987.

 

1.The State Board of Technical Education and Training, A.P., Vijayawada will conduct XXV session of Competency Certificate Examination for Electrical Supervisor and Wiremen in June/July – 2019on behalf of the Chief Electrical Inspector of Government / Chairman A.P. Electrical Licensing Board, A.P., Guntur, under Andhra Pradesh Electrical Licensing Regulations Act, 1987.

 

    1. Proposed Date of Theory Examination for SUPERVISOR-18-08-2019 (Sunday)
    2. Proposed Date of Practical examination for SUPERVISOR 19-08-2019 onwards
    3. Proposed Date of Practical examination for Electrical Wireman will be from 22-08-2019 (Thursday) Onwards.

Note: Batch wise time table for Electrical Supervisor & Wireman practical
examination will be placed on the following websites by 18-08- 2019

 

2.Qualifications for admission to the Wireman (Certificate of Competency) Examination:-
The candidates for admission to the “Wireman Competency” Certificate Examination shall be a person with four years experience, shall be certified by a Firm or a Licensed Electrical Contractor and Countersigned by an Electrical Engineer not below the rank of Asst Divisional Engineer in AP Transco., / AP Genco /AP Discom’s or Deputy Electrical Inspector in the Electrical Inspectorate.

1) He shall have completed the age of 18 Years as on 1st January 2019.

3.Qualification for admission for the Supervisor (Certificate of Competency) Examination: –

  1. A pass in 10th class or its equivalent with not less than 8 years experience in the practice of Electrical Installation works; and the said experience shall be duly certified by a Firm or Contractor.
  2. Wireman / Electrician of I.T.I. Certificate Holder with not less than 4 years experience in the practice of Electrical Installation works. National apprentice training of 1 year duration after passing I.T.I.  examination shall be counted as practical experience.
  3. The minimum age limit for appearing for examination shall be
    20 years as on 1st January,2019.

4.

      1. The following are the Examination centers for Both Supervisor & Wireman Examination.

 

Centre  Code                                    Name of the Polytechnic

38             MRAGR Govt. Polytechnic, Vizianagaram
14                              MBTS Govt. Polytechnic, Guntur
16                              Government Polytehnic, Nellore
22               ESC Government Polytechnic, Nandyal

 

a) Date of commencement of : 06-07-2019
online registration.
b) Last date for registration of
applications through online : 25-07-2019

5. Examination fee :
i) For Wireman – Rs.1, 100/-
ii) For Supervisor – Rs.1, 600/-

The candidate has to pay the Examination fee online through Debit Card / Credit Card / Net Banking only. Demand drafts / Cheques / Cash will not be accepted. Fee once paid will not be refunded under any circumstances. Application forms will neither be sold physically nor filled in application forms received through post by the Secretary, State Board of Technical Education and Training, A.P., Vijayawada under any circumstances.

6. Registration of the candidate: –
a) The candidate has to register his candidature through online for
writing the examination by entering the personal details in the website

https://ewsapsbtet.in. The guidelines for registration of online application are given in the website for reference.
b) The candidate has to submit the hardcopy of filled in application downloaded from the website, at the respective examination centre by enclosing the copies of certificates attested by the Gazetted officer including original certificates of experience signed by the concerned contractor / firm and counter signed by ADE of APGenco., / APTransco., /AP Discoms / Dy. Electrical Inspector of Electrical Inspectorate and also enclose the renewal certificate of the contractor license. If the candidate is failed to submit the above certificates, he/she will not be allowed for
appearing the examination.

Candidates are requested to visit the website  for the details of registration, syllabus,
Model papers of Supervisor examination and instructions to the candidates.

The applications received through online only be accepted. Applications received
from any other mode will be rejected.

Preparation for May/June-2019 instant cum Advanced Supplementary Diploma Examinations

Sub:- SBTET – Diploma Examinations – Key Preparation for May/June-2019 instant cum
Advanced Supplementary Diploma Examinations – Staff drafted – Subject allotment – Reg.

With reference to the subject cited above, the Principals are hereby informed that the answer key to the question papers pertaining to the Advnced Supplementary Diploma Examinations of May/Jun’2019 have to be prepared. As per the guidelines, the subjects for preparation of key have been allocated to various Polytechnics mentioned in the annexure – II. The key preparation instructions are herewith enclosed as an Annexure-I for their reference.

The Principals of the concerned Polytechnics are hereby requested to instruct the respective subject experts of your Institution to prepare the key duly collecting the question paper from the Principal / chief Superintendent of the centre. He / She may be instructed to submit the soft copy of the
answer key to the email address preexam.apsbtet@gmail.com within Four days from the scheduled
date of exam. The concerned HOS may also be instructed to moderate the paper before sending the same to SBTET to the above email address. The staff drafted for this purpose will be paid remuneration as per rules of SBTET. They may also be informed that, if any errors are found in the key, suitable action will be initiated against
them. Hence, the Principals of respective Polytechnics are requested to bestow their special attention
and see that the work is completed within the time , so as to enable this office to communicate the same
to examiners for valuation of answer scripts.

ANNEXURE-I
Instructions to Key Writer:

  1. The key writer should confirm / certify that the weightage of marks are followed in the question paper
    as per syllabus.

  2. The key writer shall ensure that the question paper is free from mistakes and shall write key after
    discussion with the key moderator.

  3. If any discrepancy is found in the question paper, the Controller of the examinations shall be
    contacted / informed with suggestions of key writer and moderator for clarification.

  4. Shall follow the guidelines of the Controller of the Examinations for any discrepancy in the question
    paper.

  5. The name of the key writer and key moderator alongwith his/her contact number should be
    correctly written with their signatures on top of the key along with name of course, subject code and subject name.

  6. The answers should be specific and unambiguous.

  7. The distribution of marks should be clearly marked for all questions with in the key and no separate scheme of valuation

  8. The answers in the form of points shall be written where ever it is possible

  9. For the descriptive answers, mention clear answer instead of directly producing the matter from text
    books.

  10. The answer is to be prepared within the limits of syllabus

  11. While preparing key for drawing subject, the necessary drawings shall be prepared preferably with AutoCAD or neat manual drawing with clear dimensions (Use Black ink).

  12. Key should have scheme of valuation and make ensure that every question is answered as per the
    scheme and answering in that order

  13. Scheme of valuation should have clarity for each and every question, awarding marks for every
    important point/step/important part in the drawing/orientation in the drawing.

  14. Specify the marks to be allotted for correct methodology/steps, even if the answer is wrong in case
    solution of problems.

  15. Specify the marks to be allotted for correct diagram particularly in drawing if orientation/location is
    wrong.

Note:- Write/Print on the top of first page of the key with print code number, scheme, subject
codes & subject name.